 idVendor: 0x03F0
 iManufacturer: SCM Microsystems Inc.
 idProduct: 0x0824
 iProduct: HP USB Smartcard Reader
 bcdDevice: 5.30 (firmware release?)
 bLength: 9
 bDescriptorType: 4
 bInterfaceNumber: 0
 bAlternateSetting: 0
 bNumEndpoints: 3
 bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
 bInterfaceSubClass: 0
 bInterfaceProtocol: 0
 iInterface: 4
 CCID Class Descriptor
 bLength: 0x36
 bDescriptorType: 0x21
 bcdCCID: 1.00
 bMaxSlotIndex: 0x00
 bVoltageSupport: 0x01
  5.0V
 dwProtocols: 0x0000 0x0003
  T=0
  T=1
 dwDefaultClock: 4.000 MHz
 dwMaximumClock: 12.000 MHz
 bNumClockSupported: 0 (will use whatever is returned)
  IFD does not support GET CLOCK FREQUENCIES request
 dwDataRate: 9600 bps
 dwMaxDataRate: 307200 bps
 bNumDataRatesSupported: 0 (will use whatever is returned)
  IFD does not support GET_DATA_RATES request
 dwMaxIFSD: 252
 dwSynchProtocols: 0x00000000
 dwMechanical: 0x00000000
  No special characteristics
 dwFeatures: 0x000100BA
  ....02 Automatic parameter configuration based on ATR data
  ....08 Automatic ICC voltage selection
  ....10 Automatic ICC clock frequency change according to parameters
  ....20 Automatic baud rate change according to frequency and Fi, Di params
  ....80 Automatic PPS made by the CCID
  01.... TPDU level exchange
 dwMaxCCIDMessageLength: 263 bytes
 bClassGetResponse: 0xFF
  echoes the APDU class
 bClassEnveloppe: 0xFF
  echoes the APDU class
 wLcdLayout: 0x0000
 bPINSupport: 0x00
 bMaxCCIDBusySlots: 1
